RabbitLink EG2110 Manual do Utilizador descarregar pdf (Página 23)

User’s Manual 19

3.1.6 Troubleshooting Tips

• If Dynamic C is unable to establish communication with the RabbitLink, make sure

that the RabbitLink is powered on, and make sure that the Ethernet cable is firmly con-

nected to the RabbitLink and that the LED labeled LINK is on.

• If Dynamic C is still unable to establish communication with the RabbitLink, make

sure that Dynamic C has the correct IP address and control port information. Look in

the

Communications dialog box.

• If Dynamic C is able to establish communication with the RabbitLink, but midway

through the download process displays either "Error receiving Flash ID from target"or

"Target Communication Error,” check to make sure that the program download cable is

plugged in correctly from the RabbitLink to the controller being programmed, and that

the controller is powered on.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Sem comentários

RabbitLink EG2110 Manual do Utilizador Página 23